Original CT150 Ultrasonic Fuel Injector Tester Cleaner for Petrol Car Motorcycle. This is a four-cylinder car after blocking two test tubes it will fit two cylinders. The machine works with gasoline injectors, not suitable for diesel injectors. It is good at removing carbon from fuel system, such as testing leaking, Uniformity, inbreathe about injectors. The cleaning fluid is 3M car injector cleaning fluid, and the test fluid is industrial alcohol.For damage caused by non-human factors, we promise to resend parts for free within 3 years. Tool trolley make it more conveniently to operate. SIEMENS pump, make it endurable. Discharging fluid more quickly, add 2 value in front of machine. Fuel Tank Capacity: 2000 ml.
Capacity of Measuring Cylinder: 125 ml. Injecting Times: 09900 Step: 100ms. PWM Pulse: 020.0 ms Step: 0.1 ms.
System Pressure: 00.6Mpa (adjustable). Power of Ultrasonic Cleaning: 70W. Machine size: 320mm x 300mm x 220mm.
Spark and fire is prohibited. Clean injector's outside with gasoline or cleaning liquid before open machine.Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt. Turn on ultrasonic systempulsed allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors. Fixed injectors on main machine. Testing injectors for resistance, shorts, and current draw. Performing leak test, spray pattern, and flow rate testing on flow bench. Support for Audifor Australia Fordfor Benzfor BMWfor Brilliancefor Chevroletfor Chevyfor Chryslerfor Citroenfor Daciafor Dadifor Daewofor Daihatsufor Demofor Fiatfor Fordfor GMfor Holdenfor Hondafor Hyundaifor Isuzufor Jaguarfor Kiafor Lanciafor Land Roverfor Mahindrafor Marutifor Mazdafor Mitsubishfor Nissanfor Opelfor Peugeotfor Porschefor Renaultfor Romeofor Roverfor Saabfor Seatfor Skodafor Smartfor Subarufor Suzukifor Tatafor Toyotafor Volvofor VWfor Yamaha. What is a cleaning and testing solution.
The cleaning liquid is 3M Injector cleaning fluid, used to clean the attachments (carbon deposits) on the fuel injection nozzle. It is generally highly corrosive and flammable. It should be kept away from the fire source and avoid contact with the skin when used. Use it in the ultrasonic cleaning tank of the injector cleaner.
The testing liquid is industrial alcohol, used to test and judge the quality of the fuel injection nozzle. It is a colorless and transparent liquid with no irritating odor, non-corrosiveness, and not easy to emit, but used in the measuring cylinder of the fuel nozzle cleaning machine.
It is forbidden to use corrosive liquids as fuel injection nozzle detection liquid to detect fuel injection nozzles. Corrosive liquids will damage machine seals and fuel injectors. It is forbidden to use a cleaning agent instead of the detection liquid, because the cleaning agent is generally corrosive and will cause damage to equipment and injector seals.It is forbidden to use gasoline instead of cleaning agent or test liquid, which is dangerous and easy to cause safety hazards. Please use absolute ethanol (industrial alcohol) or other non-corrosive liquids as the detection liquid (generally the detection liquids are colorless and transparent, no irritating odor liquid). 1pcs Cleaning Fluid Drain Valve.
We are a professional worldwide Professional company. We are reliable supplier to both wholesalers and retail sellers.
We supply many products on Automobile consumer. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target! All messages be reply within 24 hours. The item "Original CT150 Ultrasonic Fuel Injector Tester Cleaner for Petrol Car Motorcycle" is in sale since Friday, September 25, 2020. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Other Diagnostic Service Tools".
The seller is "cartools2019" and is located in Walton, Kentucky. This item can be shipped to United States.