Launch CNC603A Fuel Injector Tester Ultrasonic Cleaner

  

Launch CNC603C Fuel Injector Tester Ultrasonic Cleaner. Launch CNC602A powerful upgrade version, Original. Speed Range for Simulation Test. Support almost all 12V car petrol injector. LAUNCH CNC603C Fuel Injector Tester Cleaner Cleaning Machine for Gasoline Car.

LAUNCH CNC-603C is an electromechanical integration product that combines ultrasonic cleaning technology with microprocessor hydraulic control cleaning detection technology. It can simulate various working conditions of the engine, clean and inspect the fuel injectors of the car, and also clean the fuel injectors and the fuel supply system.

To detect the uniformity of the fuel injection quantity of each injector and. Monitor the spray status of injectors thoroughly and carefully by using the backlight, and to backflush.

To test the leakage and dribbling conditions of injectors under system pressure. To detect the amount of fuel injected normally by injectors in 15 seconds. Under specific working conditions and parameters, the precise simulation of test of injectors. To perform ultrasonic cleaning on multiple injectors at the same time, removing carbon. Coming with a variety of disassembly-free cleaning connectors, the device can be.

Used to perform on-vehicle cleaning and maintenance for various vehicle models. The system supports multiple languages and users can choose the appropriate language. Version information: to check the software version information of the current device. This machine will be sent with a 220V to 110V Valtage Converter. So it will support both of the 110V & 220V! Adopting ultrasonic cleaning technology, CNC-603A Injector Cleaner & Tester presents a strong cleaning. The product also adopts fuel pressure adjustment and control technology by microcomputer, which can. Ensure stable fuel pressure and wide adjustable range.

It is applicable to vehicles equipped with a variety of. Meanwhile, the automation of injectors cleaning and testing processes can be. Thanks to the adoption of microcomputer automatic control and digital display technologies, the cleaning. And testing processes can be controlled automatically and the parameters of the main status can be monitored.

Automatic fuel drain during a certain test can be realized via a routine, owing to the adoption of automatic. Start or [stop] fuel drainage via the [Drain] button on the control panel in. Width Range: 0.525ms (step: 0.1ms).

Net Weight: 10.5kg Gross. Strength of External Magnetic Field: 400A/m.

Open fires is strictly prohibited within 2M. 1- Pulse line; 2-Fuel distributor assembly; 3-Observation window tube; 4-Ultrasonic cleaner.

5-Control panel; 6-Power switch; 7-Fuel pressure gauge; 8-Quick Connector ; 9-Fuel pump. 10-Fuel drainage pipe; 11-Automatic cleaning oil return port. After the end of cleaning and testing, a cleanup should be done, which includes.

Press [Drain] button on the control panel to drain test solution to a fuel container. Switch off the power switch and unplug the power plug. Take out the ultrasonic cleaning pool and pouring out all cleaning fluid completely shown in Figure 4.2, and wipe the ultrasonic cleaning unit with a soft dry cloth.

Wipe the table top of the machine with a soft dry cloth. To avoid volatilization, all the test solution in the fuel tank should be discharged. If it can be used again, store. It in a safe place. If it is dirty and cannot be used any more, dispose it according to relevant regulations. 1 set Launch CNC603C fuel injector tester cleaner machine. We stand behind every product we sell. We value your feedbacks, please leave your feedback and comment.

Your better comments will be an encouragement for us to offer the better quality and the better service in future. The item "Launch CNC603A Fuel Injector Tester Ultrasonic Cleaner" is in sale since Monday, June 21, 2021. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Fuel Pressure Testers".

The seller is "carseneschal" and is located in Chino, California. This item can be shipped to United States.

1. Modified Item: No
2. Country/Region of Manufacture: China
3. Custom Bundle: No
4. Engine Type: Gasoline
5. Features: Launch CNC602A powerful upgrade version, Original
6. Manufacturer Part Number: CNC603A
7. Maximum PSI: 120 PSI
8. Vehicle Type: Motorcycle
9. Accessories: Carrying Case
10. Brand: LAUNCH
11. Non-Domestic Product: Yes
12. Warranty: 5 Year