Car Motorcycle Fuel Injector Cleaning Machine Ultrasonic Cleaner Tester Kit 110V

  

Car Motorcycle Fuel Injector Cleaning Machine Ultrasonic Cleaner Tester Kit 110V. Fuel pump oil supply simulates low, medium and high engine conditions, cleaning and testing the fuel injectors of the automobile; ultrasonic cleaning can simultaneously clean multiple injectors, which can effectively and completely remove carbon deposit for the automobiles injectors. What liquid I can use for the checking?

What liquid for the cleansing mode of this machine? Special test liquid Injector detergent.

The glass cylinders are used to contain testting liquid, which is usually professional fuel injector testing liquid, or industrial alcohol. To avoid corrosion, DO NOT put cleaning liquid or any other corrosive liquid in cylinders. The ultra-sonic tank is used to contain cleaning liquid, cleaning liquid is usually corresive, please be careful, do not mistake cleaning liquid with testing liquid. On the left is the test liquid (test the injectors in a glass tube). And on the right is the cleaning liquid (use for ultrasound). Can this equipment clean the motorcycle? Yes, but it can only do simple cleaning and can not test. Support For 99% Car Model. Support for Audifor Australia Fordfor Benzfor BMWfor Brilliancefor Chevroletfor Chevyfor Chryslerfor Citroenfor Daciafor Dadifor Daewofor Daihatsufor Demofor Fiatfor Fordfor GMfor Holdenfor Hondafor Hyundaifor Isuzufor Jaguarfor Kiafor Lanciafor Land Roverfor Mahindrafor Marutifor Mazdafor Mitsubishfor Nissanfor Opelfor Peugeotfor Porschefor Renaultfor Romeofor Roverfor Saabfor Seatfor Skodafor Smartfor Subarufor Suzukifor Tatafor Toyotafor Volvofor VWfor Yamaha, etc. Why have to clean injector. When we turned off the engine suddenly, the gasoline which have been spray out can not be recycled. It would attached on the injector and combustion chamber walls. Gasoline is easy to volatile, but wax and varnish were stayed.

Heat these wax and varnish day after day, they will be changed into hard coke. The hard coke will be produced more quickly and more thickly when engine work with poor quality fuel. Tips: Do not get any cleaning solvent on the outside of the vehicle, as this will damage the paint. A heavily clogged fuel injector may not allow enough cleaner to pass through during a routine cleaning to be adequately cleaned. Additional cleanings may be needed to clear heavy deposits.

AUTOOL CT200 Fuel Injector Cleaner & Tester is with English Panel. We can clean and test both petrol car and motorcycle injector with this machine.

(motorcycle support HONDA YAMAHA SUZUKI SANYANG only). Ultrasonic cleaning , dismantle the carbide of the injector. Stimulate engine runing condition, test injector in different speed range, Check and test injectors's injection situation:atomization/sprayingangle/spraying mount/spraying uniformity. Uniquely designed various compound bonder for all kinds of side-inlet injectors.

With reverse flush function, to clean inside out, to improve clean efficiency. With a set of adaptors to clean injectors without dismantling it from the engine. Clean injector's outside with gasoline or cleaning liquid before open machine. 2 Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt.

3 Turn on ultrasonic systempulsed allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors. 4 Fixed injectors on main machine. 5 Testing injectors for resistance, shorts, and current draw. 6 Performing leak test, spray pattern, and flow rate testing on flow bench. Fuel Tank Capacity: 2000 ml.

Capacity of Measuring Cylinder: 140ml. Injecting Times: 09900 Step: 100ms. PWM Pulse: 020.0 ms Step: 0.1 ms. System Pressure: 00.6Mpa (adjustable). Power of Ultrasonic Cleaning: 70W. Frequency of Ultrasonic Cleaning: 28 KHZ±0.5 KHZ. NoteInjector cleaning agent test liquid and cleaning agent precautions. It is forbidden to use corrosive liquids as fuel injection nozzle detection liquid to detect fuel injection nozzles. Corrosive liquids will damage machine seals and fuel injectors. It is forbidden to use a cleaning agent instead of the detection liquid, because the cleaning agent is generally corrosive and will cause damage to equipment and injector seals. It is forbidden to use gasoline instead of cleaning agent or test liquid, which is dangerous and easy to cause safety hazards. Please use absolute ethanol (industrial alcohol) or other non-corrosive liquids as the detection liquid (generally the detection liquids are colorless and transparent, no irritating odor liquid). What is a cleaning agent? The cleaning agent is used to clean the attachments (carbon deposits) on the fuel injection nozzle. It is generally highly corrosive and flammable. It should be kept away from the fire source and avoid contact with the skin when used. Use it in the ultrasonic cleaning tank of the injector cleaner. What is a test solution? The test liquid is used to test and judge the quality of the fuel injection nozzle. It is a colorless and transparent liquid with no irritating odor, non-corrosiveness, and not easy to emit, but used in the measuring cylinder of the fuel nozzle cleaning machine. 2 x Valve (for discharging fluid from machine tank).

6 x Adapter for fixing injector on machine. 6 x Blocker for block distributor. 1 x Impulse cable for providing power to open injector. Please make sure it's correct.

This will help your product to be received safely and quickly! Please return the item within 30 days after receiving if you are not happy with your purchasing. We have been engaged for many years in the line of automobile repair instruments and our corporation is established for the purpose of trustworthiness.

We have 2 warehouses that are located in Germany and US. Customer Service Hours: M-F: 9:30AM - 18:00PM BST (Beijing Standard Time). The item "Car Motorcycle Fuel Injector Cleaning Machine Ultrasonic Cleaner Tester Kit 110V" is in sale since Tuesday, April 27, 2021. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Other Diagnostic Service Tools".

The seller is "etoolshop4u" and is located in Cranbury, New Jersey. This item can be shipped to United States.

1. Brand: AUTOOL
2. Manufacturer Part Number: Does Not Apply
3. Warranty: 3 Year
4. Country of Manufacture: China
5. Language: English
6. Model name: Autool CT200
7. Vehicle Type: ATV
8. Type: Injector Tester
9. OBD Interface: CAN
10. Supported System: ABS
11. Country/Region of Manufacture: China
12. Non-Domestic Product: Yes
13. Voltage: 110V US PLUG
14. Fitment Type: Injector Tester
15. Speed Range: 0~7500 rpm
16. Frequency of Ultrasonic Cleaning: 28 KHZ±0.5 KHZ
17. System Pressure: 0~0.6Mpa (adjustable)
18. Description: 6 Gasoline Cylinders
19. PWM Pulse: 0~20.0 ms Step: 0.1 ms
20. Injecting Times: 0~9900 Step: 100ms
21. Time: 0~20 minute (adjustable)
22. Feature 1: Non-dismantle Cleaning
23. Feature 2: Ultrasonic cleaning