3.2L Ultrasonic Cleaner Multifunction Jewelry Glasses Cleaning Tool UK 200-240V

  

Adopt die casting stainless steel tank, durable and long service life. Industrial grade integrated circuit, the temperature range is 0~80? The cleaner has degassing and degreasing function, 199 minutes working time 4.

33KHz for gross rinse and 40KHz for intensive rinse 5. The power sweep function can prevent ultrasonic fatigue 6. Auto stand-by, sleep, and wake up by one key-press mode 7. Digital controller of high-accuracy and a long service-life. Model: DK-300PF Inner Tank Capacity: 3.2L Inner Tank Size: Approx.

240 x 140 x 100 x 0.7mm / 9.4 x 5.5 x 3.9 x 0.03in Size: Approx. 270 x 170 x 240mm / 10.6 x 6.7 x 9.4in Ultrasonic Frequency: 33/40KHz(operating frequency can be set) Ultrasonic Power: 120W Heating Power: 100W Working Time Setting Range: 1-99min Temperature Heating Range: Up to 80? Degassing and Degreasing Function: Equipped Liner Material: SUS304 Stainless Steel Shell Material: Stainless Steel Basket: Equipped Sound Reduction Cover: Equipped Button Mode: Waterproof touch button.

Fill the stainless steel tank with cleaning solution; Plug the power into grounded outlet; After power-on, the temperature displays the actual environmental temperature, LED displays 3 minutes (default ultrasonic time). Time setting: Press the "TIME+/TIME- "shortly at a time means time increase/reduce 1min at a time, press and hold time switch continuously will increase/reduce by 10mins. The cleaning stops when the timer counts down to 00:00.

If the unit needs to be stopped before the timer runs up, press "Ultrasonic frequency" button. NOTE: Do not run the cleaner continuously for more than one hour 3. Temperature setting: Press "temperature+/temperature-"shortly at a time means time increase or reduce 1?

At a time, press and hold time switch continuously will increase/reduce by 10? Usually, the best cleaning temperature is within 40? After time and heat setting, press "Heating" or "ultrasonic" button to start both function. If press the "ultrasonic " again, the ultrasonic function will stop, and the heating function will stop at the same time.

If want to keep heating, need to press " heating" button again. Degas mode: work intermittently, i. 6s "ON" + 2s "OFF" working mode.

It can clean items deeply and efficiently. Empty the tank and clean both the outside and inside of the cleaner with a clean and dry cloth for next use.

NOTE: Do not pour water out until it's cooling, because of hot water will hurt you and also empty burn will damage the machine itself. Q: What is an ultrasonic cleaner?

A: Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic vibration in the fluid. Microscopic bubbles are formed, and then implode violently causing the cavitation which create an intense scrubbing action on the of the item being cleaned. The bubbles are small through to penetrate microscopic crevices, cleaning them thoroughly and consistently. Q: Which products can I clean this model?

A: Many products can be cleaned. Such as glasses, necklaces, earrings, bracelets, electronics, watches, dentures, printer ink heads, shaver head, nib, coins, badges, pacifiers, etc. Q: Which washer liquid can be properly added for better cleaning during the cleaning process?

A: You can add cleaning liquid or detergent, such as: detergent, soapy water, disinfectant, etc. However, do not add acid or alkaline solution to the machine to prevent ABS corrosion damage. Q: Common products have 40HZ or 33HZ. What is the difference between these two different frequencies?

A: These products are divided into high frequency and low frequency. Generally, the high frequency has 40HZ and 42HZ, and the low frequency generally has 28HZ and 33HZ.

The higher the frequency, the larger the number of bubbles generated, the smaller the bubbles, and the better the cleaning effect for some blind holes; the lower the frequency, the smaller the number of bubbles generated and the larger the bubbles, which is suitable for cleaning large surfaces. Products with both frequencies can be better cleaned.

Q: What is the degassing function? What is the use of this feature?

A: The ultrasonic cleaning machine will discharge the air inside the cleaning liquid during use. During the use process, the air content in the cleaning liquid will be reduced. If the cleaning time is too long, ultrasonic fatigue will occur, which will affect the cleaning effect.

The degassing function is that during the use of the washing machine, the equipment stops vibrating periodically for a short period of time. During the vibration stoppage, the outside air is injected into the cleaning liquid due to the pressure difference between the inside of the cleaning liquid and the atmosphere.

This can achieve a better cleaning effect. Q: What is the Power Sweep function? A: The product has two frequencies, high and low. If only one frequency is used for cleaning, the cleaning effect is not satisfactory.

The Power Sweep function works alternately between high and low frequencies. After a high frequency operation for a period of time, it automatically switches to low frequency for a period of time.

This allows for longer cleaning times and more comprehensive cleaning. Thereby achieving an optimal cleaning effect. While the machine is working normally, the syntony of the ultrasonic and tank gives a well-proportioned sound with no shudder on the of the water but sprays generated by the tiny bubbles.

If there are discontinuous surges, please add or reduce a little of washing solution in the tank to stop the surges, which is good for get a better cleaning effect. Under the premise of ensuring that the cleaning objects are clean, work as intermittently as possible and not warm, because the warming and long-time ultrasonic work will increase the temperature inner of the chassis and accelerate the aging of the electronic components. Never use flammable and corrosive detergents. When there is no proper cleaning solution in the cleaning tank, the heating and ultrasonic waves must not be turned on. Prevent cleaning fluid and water from entering the chassis, soaking the circuit board and the vibrator, burning electrical components.

If any foreign object falls into the bottom of the tank, remove it immediately (do not take it directly by hand to prevent injury). When changing liquid or draining, it should be carried out in the tank at normal temperature, and be sure to turn off the power and unplug the power cord! After cleaning, do not accumulate in the cleaning tank! Keep the appearance of the machine clean when cleaning; clean the machine after stopping, keep the whole machine clean and dry.

Please don not make the machine work for a continuous long time (not more than 60 minutes) as possible as you can because a long-time working will raise the temperature of the case, accelerate the burn-in process of inner electronic components and parts. Our listing price includes the value of goods, packaging cost, and export. Please check with your country's. We will reply your message within 48 hours.

If you do not receive our reply within 48 hours, pls. Post a message again beuse sometimes our message system may block some emails.

If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communition and dispatching of your orders.