Impulse Pulse Signal Test Cable For LAUNCH CNC602A Injector Cleaner. We will not provide the Cleaning Fluid and Testing Liquid in the package. You will find them in local market. This machine was for six-cylinder car. Block 2 tube for 4 jar.
Item fit for two kinds of injectors. Top feed injector accessories are standard configure. Side feed injector accessories for option. The machine fit for most of petrol injector(come with lots of adapters), but not for diesel injector.Convert cable come with machine, please try to use the convert cable if pulse cable can not match your injector. Why do we have to clean injector. When we turned off the engine suddenly, the gasoline which have been spray out can not be recycled.
It would attached on the injector and combustion chamber walls. Gasoline is easy to volatile, but wax and varnish were stayed. Heat these wax and varnish day after day, they will be changed into hard coke.
The hard coke will be produced more quickly and more thickly when engine work with poor quality fuel. The hard coke lead 4 problems on injector. So we have to clean injector and engine system. CNC-602A is an advanced electromechanical product, which can clean.And test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle. About the cleaning liquid and testing liquid. About the cleaning liquid, you need to use the cleaning liquid which is special for injector cleaning.
About the testing liquid, you can use the testing liquid which is special for injector testing or use alcohol for a test. Cleaning hard coke from injector via ultrasonic and auto electronic technology. Imitate working as vehicle's fuel system.Washable testing single-point injection as TBI, CFI, ECI and CIS. The minimum pulse width test. Ultrasonic cleaning: To perform simultaneous cleaning on several injectors. And to remove the carbon deposits on the injector completely. Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector.
And to monitor the spraying status of each injector with the help of backlight. His test is also for reverse flush.Leakage test: To test the sealing and dribbling conditions of injectors under system pressure. Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection. Test: To test injectors by simulating different working conditions. On-vehicle cleaning: The unit is equipped with various adaptors and couplers.
That facilitate cleaning on the injectors on vehicle. Simulated RPM range: 109990rpm; step: 10rpm. Pulse width: 0.525ms; step 0.1 ms. Audi, Australia Ford, Benz, BMW, Brilliance, Chevrolet, Chevy, Chrysler, Citroen. Dacia, Dadi, Daewoo, Daihatsu, Demo, Fiat, Ford, GM, Holden.
Honda, Hyundai, Isuzu, Jaguar, Kia, Lancia, Land Rover, Mahindra, Maruti, Mazda, Mitsubish, Nissan, Opel. Peugeot, Porsche, Renault, Romeo, Rover, Saab, Seat, Skoda.
Smart, Subaru, Suzuki, Tata, Toyota, Volvo, VW, Yamaha. Launch CNC-602A injector &cleaner tester package list. 1 x CNC602A Main Machine 201020068 6-cylinder fuel distributo kits. 103250014 Adaptor for fuel top-supply injector.103250028 Stopper for fuel distributor. 103230107 Adjusting pole for reverse flush.
103250013 Adaptor for fuel top-supply injector. 103250015 Swiss thread adaptor for fuel top-supply injector. 103250016 Coarse thread adaptor for fuel top-supply.
105020217 pulse signal connection cable 1. Be used for the connection. Of special injector, T=0.5. 105020218 pulse signal connection cable 2.Of special injector, T=0.8. 101020131 6-cylinder Injector pulse signal cables.
104130024 Lots of different O rings. Excellent Services are used as per customers' request.
We will try our best to give customers good and pleasant parchasing experience!!! We provide 12 months' free repair for the defective items (excluding items damaged and/or misused after receipt), and 3 months' for the accessories. Your satisfaction is our priority. We will resolve every issue for you and amke every effort to meet your satisfaction. Business time: 8:30-18:00 from Monday to Friday 9:00-12:00 Saturday.
AUTOOL CT150 Ultrasonic Petrol Fuel System Injector Cleaner Tester Car Motor USA. AUTOOL SDT206 Fuel Pipe Cooling Tank Oil Leak EVAP Smoke Leakage Detector USA. AUTOOL SDT106 Car EVAP Fuel Pipe Air Intake System Smoke Leakage Detector USA. AUTOOL SDT202 Auto EVAP Fuel Pipe Cooling Tank Oil Smoke Leak Detector US Stock.MIG Wire Feed Welder Flux Cored Wire Stick Arc DC IGBT Welding Machine 110V. MMA Arc Inverter IGBT Welder 160A Handheld Stick Welding Machine 110V US Plug. DC Plasma Cutter Machine 50A 110V Inverter IGBT Air Cutting Machine 14mm Cut. USA Refrigeration Digital Manifold Gauge HVAC Vacuum Pressure Temp Tester Kit. The item "USA Launch CNC602A Auto Gasoline Ultrasonic Injector&Cleaner + 110V Transformer" is in sale since Friday, September 1, 2017.
This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Other Diagnostic Service Tools". The seller is "ecartoolsupplier" and is located in shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan.