Launch CNC602A Ultrasonic Fuel Injector Cleaner & Tester Automotive 6 cylinder. 100% Original Launch CNC-602A Injector Cleaner & Tester. CNC-602A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle. Adopting the powerful ultrasonic cleaning.
Technology, The equipment offers complete cleaning. Fuel pressure control through microcomputer offers. Stable pressure control and large adjustable range. Which is suitable for all EGI vehicles and can help to.
Achieve automatic cleaning and testing of injectors. With the help of microcomputer control and digital. Display, The equipment makes possible automatic. Cleaning, testing injectors and real-time monitoring.
Automatic fuel draining through preset programs for. Test liquid/detergent can also be.
Drained by pushing a button on the control panel. Adopting humanization design can make the.
System pressure fast restored to the default values. After the engine has been in operation for a period of time. Its fuel flow may be blocked or become un-smooth owing.To buildup of dust and impurities in fuel channel. The carbon deposits and gum made by combustion can. Easily adhere to the injectors, inlet and outlet ports, inlet. And outlet hoses, throttle and combustion chamber.
Fuel supply system, combustion chamber and injectors of. The engine must be cleaned on a timely basis. Cleaning is a solution that can save your time and labor. Why have to clean injector. When we turned off the engine suddenly, the gasoline which have been spray out can not be recycled.It would attached on the injector and combustion chamber walls. Gasoline is easy to volatile, but wax and varnish were stayed. Heat these wax and varnish day after day, they will be changed into hard coke. The hard coke will be produced more quickly and more thickly when engine work with poor quality fuel.
Package include one set of Launch CNC602A machine + voltage converter adaptor(from 220V to 110V). Launch CNC602A is 6-cylinder fuel injector cleaning machine (with 6 tubes), and it can clean and test six injectors as same time. If 4-cylinder engine, when use the CNC602A to clean and test 4 injector(there are 2 connector in machine should be stoppered). Eight-cylinder engine, when you use CNC602 do clean the test, you should do clean the test twice per four injector.Item fit for two kinds of injectors. Top feed injector accessories were standard configure. Side feed injector accessories for option.
Support no dismantle clean car fuel system. The machine work on petrol injector, not for diesel injector. The hard coke lead 4 problems on injector. So we have to clean injector and engine system. CNC-602A is an advanced electronic mechanical product, which can clean and test injectors by simulating engine working conditions.
Launch CNC602A Features & Functions. Ultrasonic Cleaning: Perform simultaneous cleaning on several injectors and remove the carbon deposits on the injectors completely. Uniformity/ Sprayability Test: Test the uniformity each injector, and monitor the spraying status of each injector with the help of backlight.This test is also for reverse flush. Leakage Test: Test the sealing and dribbling conditions of injectors under system pressure. Injecting Flow Fest: Check the injecting amount of 15 seconds constant injection. Auto Test: Test injectors by simulating different working conditions. On-vehicle Cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning injectors on vehicle. About the cleaning liquid and testing liquid. You need to use the cleaning liquid which is special for injector cleaning. You can use the testing liquid which is special for injector testing or use alcohol for a test. Audi, Australia Ford, Benz, BMW, Brilliance, Chevrolet, Chevy, Chrysler, Citroen, Dacia, Dadi, Daewoo, Daihatsu, Demo, Fiat, Ford, GM, Holden, Honda, Hyundai, Isuzu, Jaguar, Kia, Lancia, Land Rover, Mahindra, Maruti, Mazda, Mitsubish, Nissan, Opel, Peugeot, Porsche, Renault, Romeo, Rover, Saab, Seat, Skoda, Smart, Subaru, Suzuki, Tata, Toyota, Volvo, VW, Yamaha.
Power supply: AC220V±10%, 50/60Hz;AC110V±10%, 50/60Hz. Simulated RPM range: 109990rpm; step: 10rpm. Pulse width: 0.525ms; step 0.1 ms. 1 x CNC602A Main Machine. 201020068 6-cylinder fuel distributo kits.103250014 Adaptor for fuel top-supply injector. 103250028 Stopper for fuel distributor. 103230107 Adjusting pole for reverse flush. 103250013 Adaptor for fuel top-supply injector. 103250015 Swiss thread adaptor for fuel top-supply injector. 103250016 Coarse thread adaptor for fuel top-supply. 105020217 pulse signal connection cable 1. Be used for the connection of special injector, T=0.5. 105020218 pulse signal connection cable 2.
Be used for the connection of special injector, T=0.8. 101020131 6-cylinder Injector pulse signal cables. 104130024 Lots of different O rings.
We are a professional worldwide Professional company, with own factory located in China. We are reliable supplier to both wholesalers and retail sellers. We supply many products on Automobile consumer.
And we are a professional Authorized dealers of Launch, Autel and Xtool. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
It now own four stocks in the world: China warehouse, United States warehouse. It is now one of the biggest online commercial corporations in China. All messages be reply within 24hours.The item "Launch CNC602A Ultrasonic Fuel Injector Cleaner & Tester Automotive 6 Cylinder" is in sale since Tuesday, October 16, 2018. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Other Diagnostic Service Tools". The seller is "beherenow177" and is located in Shenzhen. This item can be shipped worldwide.