CT200 6Cylinders Ultrasonic Fuel Injector Cleaner Car Motorcycle Injector Tester. This machine is 6-cylinder fuel injector cleaning machine(with 6tube but It also support for 4 cylinder after blocking two test tube). Four-cylinder engine, when you use the CT200 to clean and test 4 injector(there are 2 connector in machine should be stoppered). Eight-cylinder engine, when you use CT200 do clean the test, you should do clean the test twice per four injector. Support no dismantle clean car fuel system.Need additional connector kits, not include in the item. Add 80USD to get it. The machine work on petrol and Motorcycle injectormotorcycle support HONDA YAMAHA SUZUKI SANYANG only , but not for diesel injector.
System pressure: 00.35Mpa(adjustable higher 6.0) In order protect machine , Our machine has set System pressure: 00.35Mpa. But if you need more higher range of pressure , you can adjust by yourself (it is easy to adjust). Tool trolley make it more conveniently to operate. Equip with high quality SIEMENS pump, make it endurable.1 Clean injector's outside with gasoline or cleaning liquid before open machine. 2 Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt.
3 Turn on ultrasonic systempulsed allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors. 4 Fixed injectors on main machine. 5 Testing injectors for resistance, shorts, and current draw. 6 Performing leak test, spray pattern, and flow rate testing on flow bench.What is a cleaning and testing solution. The cleaning liquid is 3M Injector cleaning fluid, used to clean the attachments (carbon deposits) on the fuel injection nozzle.
It is generally highly corrosive and flammable. It should be kept away from the fire source and avoid contact with the skin when used. Use it in the ultrasonic cleaning tank of the injector cleaner; The testing liquid is industrial alcohol, used to test and judge the quality of the fuel injection nozzle. It is a colorless and transparent liquid with no irritating odor, non-corrosiveness, and not easy to emit, but used in the measuring cylinder of the fuel nozzle cleaning machine. Important Notice Injector cleaning agent test liquid and cleaning agent precautions.
It is forbidden to use corrosive liquids as fuel injection nozzle detection liquid to detect fuel injection nozzles. Corrosive liquids will damage machine seals and fuel injectors. It is forbidden to use a cleaning agent instead of the detection liquid, because the cleaning agent is generally corrosive and will cause damage to equipment and injector seals.
It is forbidden to use gasoline instead of cleaning agent or test liquid, which is dangerous and easy to cause safety hazards. Please use absolute ethanol (industrial alcohol) or other non-corrosive liquids as the detection liquid (generally the detection liquids are colorless and transparent, no irritating odor liquid). The cleanser added into the ultrasonic cleaner just soaked the injectors' needle is suitable.
Before the ultrasonic cleanser is added into ultrasonic cleaner, do not turn on the ultrasonic cleaner. Otherwise, damage may be incurred. Strictly prohibit to put the pulse signal cable or its connecter into the cleanser, otherwise damage will be incurred.The continue work time of the ultrasonic cleaner don't be more than 30min, otherwise it will shorten the life. Not in using, please put out the power plug.
Under this function, the parameters of RPM, PW and time can be adjusted in real time. Under this function, the parameter of fuel pressure can be adjusted in real time. Ultrasonic cleaning , dismantle the carbide of the injector. Cleanning spark plugPut spark plug into cleaning tank to clean. Stimulate engine runing condition, test injector in different speed range.
Check and test injectors's injection situation:atomization/sprayingangle/spraying mount/spraying uniformity. Uniquely designed various compound bonder for all kinds of side-inlet injectors. With reverse flush function, to clean inside out, to improve clean efficiency. With a set of adaptors to clean injectors without dismantling it from the engine. 2 x Valve (for discharging fluid from machine tank).6 x Adapter for fixing injector on machine. 6 x Blocker for block distributor. 1 x Impulse cable for providing power to open injector. 1We are a professional automotive tools company, with own factory located in China. 2We are a professional authorized dealers of.
Also offer reasonable prices , excellent customer service and a reliable credit standing are our target. 3 We own three warehouse in the world: China warehouse, United States warehouse, Germany warehous.
Our normal working hours are from. All messages will be answered within 24 hours.
You are welcome to write at any time! The item "CT200 6Cylinders Ultrasonic Fuel Injector Cleaner Car Motorcycle Injector Tester" is in sale since Friday, June 19, 2020.
This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Other Diagnostic Service Tools". The seller is "obd-worldwide2019" and is located in Shenzhen. This item can be shipped worldwide.