AUTOOL SDT206 Automotive Smoke Leak Diagnostic Detector for EVAP Pipe Systems. AUTOOL SDT-106 12V Smoke Automotive Diagnostic Leak Detectors for Fuel pipe CAR. Autool CT200 Fuel Injector Ultrasonic Cleaner Tester for Petrol Car Motorcycle. Why have to clean injector. When we turned off the engine suddenly, the gasoline which have been spray out can not be recycled.
It would attached on the injector and combustion chamber walls. Gasoline is easy to volatile, but wax and varnish were stayed.Heat these wax and varnish day after day, they will be changed into hard coke. The hard coke will be produced more quickly and more thickly when engine work with poor quality fuel. Do not get any cleaning solvent on the outside of the vehicle, as this will damage the paint. A heavily clogged fuel injector may not allow enough cleaner to pass through during a routine cleaning to be adequately cleaned. Additional cleanings may be needed to clear heavy deposits.
6 x Motorcycle adapter for HONDA YAMAHA SUZUKI SANYANG only. 1 x Throttle Clean Kits. 1 x Side feed injector Clean kits. 1X Support no dismantle clean car fuel system.
Need additional connector kits, not include in the item. Munal of CT200 Injector cleaner and more information pls check this link. This version is Autool CT100 Update version , Named CT200 Injector Cleaner&Tester. This machine is 6-cylinder fuel injector cleaning machine(with 6tube but It also support for 4 cylinder after blocking two test tube). Four-cylinder engine, when you use the CT200 to clean and test 4 injector(there are 2 connector in machine should be stoppered).Eight-cylinder engine, when you use CT200 do clean the test, you should do clean the test twice per four injector. Support no dismantle clean car fuel system. Add 80USD to get it. The machine work on petrol and Motorcycle injectormotorcycle support HONDA YAMAHA SUZUKI SANYANG only , but not for diesel injector. This injector cleaner can 110V and 220V. 00.35Mpa(adjustable higher 0.6) In order protect machine , Our machine has set. Tool trolley make it more conveniently to operate. Equip with high quality SIEMENS pump, make it endurable. The CT200 cleaning machine how to work.
1 Clean injector's outside with gasoline or cleaning liquid before open machine. 2 Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt. 3 Turn on ultrasonic systempulsed allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors. 4 Fixed injectors on main machine.
5 Testing injectors for resistance, shorts, and current draw. 6 Performing leak test, spray pattern, and flow rate testing on flow bench. About the cleaning liquid and testing liquid.About the cleaning liquid, you need to use the cleaning liquid which is special for injector cleaning. About the testing liquid, you can use the testing liquid which is special for injector testing or use alcohol for a test. The cleanser added into the ultrasonic cleaner just soaked the injectors' needle is suitable. Before the ultrasonic cleanser is added into ultrasonic cleaner, do not turn on the ultrasonic cleaner. Otherwise, damage may be incurred.
Strictly prohibit to put the pulse signal cable or its connecter into the cleanser, otherwise damage will be incurred. The continue work time of the ultrasonic cleaner don't be more than 30min, otherwise it will shorten the life. Not in using, please put out the power plug.
Under this function, the parameters of RPM, PW and time can be adjusted in real time. Under this function, the parameter of fuel pressure can be adjusted in real time. Ultrasonic cleaning , dismantle the carbide of the injector.Cleanning spark plugPut spark plug into cleaning tank to clean. Stimulate engine runing condition, test injector in different speed range. Check and test injectors's injection situation:atomization/sprayingangle/spraying mount/spraying uniformity. Uniquely designed various compound bonder for all kinds of side-inlet injectors. With reverse flush function, to clean inside out, to improve clean efficiency. With a set of adaptors to clean injectors without dismantling it from the engine. 0-20ms step length 0.1ms.
Output scope of the pulsed signals. If you want more details pictures, pls contact me, i will take photos to you. 2 x Valve (for discharging fluid from machine tank). 6 x Adapter for fixing injector on machine. 6 x Blocker for block distributor.1 x Impulse cable for providing power to open injector. Otherwise an Unpaid Item case will be opened to you. Please notice that auctions are considered a legal binding, for non-paying buyers, an Unpaid Item Dispute will be opened within a reasonable amount of waiting period. We are a professional worldwide Professional company, with own factory located in China.
We supply many products on Automobile consumer. And we are a professional Authorized dealers of Launch, Autel and Xtool. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!It now own four stocks in the world: China warehouse, United States warehouse. Biggest online commercial corporations in China.
All messages be reply within 24hours. The item "Autool CT200 Fuel Petrol Motorcycle Injector Cleaner&Tester Ultrasonic 110V/220V" is in sale since Thursday, December 3, 2015. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Other Diagnostic Service Tools".
The seller is "obd-pro" and is located in ShenZhen. This item can be shipped worldwide.