AUTOOL CT200 6 Cylinder Fuel Injector Cleaning Machine Ultrasonic Cleaner Tester

  
AUTOOL CT200 6 Cylinder Fuel Injector Cleaning Machine Ultrasonic Cleaner Tester. Fuel pump oil supply simulates low, medium and high engine conditions, cleaning and testing the fuel injectors of the automobile; ultrasonic cleaning can simultaneously clean multiple injectors, which can effectively and completely remove carbon deposit for the automobiles injectors.

Support For 99% Car Model. Support for Audifor Australia Fordfor Benzfor BMWfor Brilliancefor Chevroletfor Chevyfor Chryslerfor Citroenfor Daciafor Dadifor Daewofor Daihatsufor Demofor Fiatfor Fordfor GMfor Holdenfor Hondafor Hyundaifor Isuzufor Jaguarfor Kiafor Lanciafor Land Roverfor Mahindrafor Marutifor Mazdafor Mitsubishfor Nissanfor Opelfor Peugeotfor Porschefor Renaultfor Romeofor Roverfor Saabfor Seatfor Skodafor Smartfor Subarufor Suzukifor Tatafor Toyotafor Volvofor VWfor Yamaha, etc. AUTOOL CT200 Fuel Injector Cleaner & Tester is with English Panel. We can clean and test both petrol car and motorcycle injector with this machine. (motorcycle support HONDA YAMAHA SUZUKI SANYANG only).

Ultrasonic cleaning , dismantle the carbide of the injector. Stimulate engine runing condition, test injector in different speed range, Check and test injectors's injection situation:atomization/sprayingangle/spraying mount/spraying uniformity. Uniquely designed various compound bonder for all kinds of side-inlet injectors. With reverse flush function, to clean inside out, to improve clean efficiency. With a set of adaptors to clean injectors without dismantling it from the engine.

Why have to clean injector. When we turned off the engine suddenly, the gasoline which have been spray out can not be recycled. It would attached on the injector and combustion chamber walls. Gasoline is easy to volatile, but wax and varnish were stayed.

Heat these wax and varnish day after day, they will be changed into hard coke. The hard coke will be produced more quickly and more thickly when engine work with poor quality fuel. Tips: Do not get any cleaning solvent on the outside of the vehicle, as this will damage the paint.

A heavily clogged fuel injector may not allow enough cleaner to pass through during a routine cleaning to be adequately cleaned. Additional cleanings may be needed to clear heavy deposits. Injector cleaning agent test liquid and cleaning agent precautions. It is forbidden to use corrosive liquids as fuel injection nozzle detection liquid to detect fuel injection nozzles.

Corrosive liquids will damage machine seals and fuel injectors. It is forbidden to use a cleaning agent instead of the detection liquid, because the cleaning agent is generally corrosive and will cause damage to equipment and injector seals. It is forbidden to use gasoline instead of cleaning agent or test liquid, which is dangerous and easy to cause safety hazards. Please use absolute ethanol (industrial alcohol) or other non-corrosive liquids as the detection liquid (generally the detection liquids are colorless and transparent, no irritating odor liquid).

What is a cleaning agent? The cleaning agent is used to clean the attachments (carbon deposits) on the fuel injection nozzle. It is generally highly corrosive and flammable. It should be kept away from the fire source and avoid contact with the skin when used.

Use it in the ultrasonic cleaning tank of the injector cleaner. What is a test solution? The test liquid is used to test and judge the quality of the fuel injection nozzle. It is a colorless and transparent liquid with no irritating odor, non-corrosiveness, and not easy to emit, but used in the measuring cylinder of the fuel nozzle cleaning machine. Clean injector's outside with gasoline or cleaning liquid before open machine. 2 Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt.

3 Turn on ultrasonic systempulsed allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors. 4 Fixed injectors on main machine.

5 Testing injectors for resistance, shorts, and current draw. 6 Performing leak test, spray pattern, and flow rate testing on flow bench.

2 x Valve (for discharging fluid from machine tank). 6 x Adapter for fixing injector on machine. 6 x Blocker for block distributor. 1 x Impulse cable for providing power to open injector.

Nowadays, you can meet AUTOOL on every continent and in 160 countries around the world. Vary from country to country, please understand. The repair or replacement of products is determined by the actual breakdown situation of product.

It is guaranteed that AUTOOL will use brand new component, accessory or device in terms of repair or replacement. While the product is received for more than 90 days, the customer will bear the appropriate cost and we will provide the parts to the customer for replacement free of charge. The product breakdown because the user does not follow product instructions to use or maintain the product. AUTOOL was founded in 2014 in Shenzhen, China, inspired by a group of vehicle enthusiasts. They have been in the field of car repair tools for more than ten years, dreaming of a simpler and more efficient solution for car repair!

Product development, quality control, and customer service are always highest on our list of priorities. Moreover, we will launch premium new products persistently, with patented technologies and innovative ideas embedded in. We are always responsible for our products, responsible for our customers and responsible for our partners. We aspire to be an outstanding and competitive supplier of automotive tools, providing the customers with affordable and high-quality products. Wish we can solve the problem peacefully.

We will reply you within 12 hours and do our best solve the problem with you Except on Weekends and Holidays. The item "AUTOOL CT200 6 Cylinder Fuel Injector Cleaning Machine Ultrasonic Cleaner Tester" is in sale since Thursday, July 15, 2021. This item is in the category "Vehicle Parts & Accessories\Garage Equipment & Tools\Diagnostic Equipment & Tools\Other Diagnostic Service Tools". The seller is "autool_official_store" and is located in Shenzhen.

This item can be shipped worldwide.

1. Features: Injectors Tester cleaning injectors
2. Power of Ultrasonic Cleaning: 70W
3. Voltage: 110V/220V
4. Fitment Type: CT200
5. Speed Range: 0~7500 rpm
6. Frequency of Ultrasonic Cleaning: 28 KHZ±0.5 KHZ
7. System Pressure: 0~0.6Mpa (adjustable)
8. Description: 6 Gasoline Cylinders
9. Supported System: ABS
10. Model: Autool CT200
11. Car Maker: Interchangeable
12. Vehicle Type: Heavy Duty/Commercial
13. Capacity of Measuring Cylinder: 125ML
14. OBD Interface: CAN
15. Manufacturer Part Number: Does Not Apply
16. Brand: Autool
17. PWM Pulse: 0~20.0 ms Step: 0.1 ms
18. Warranty: 3 Year
19. Injecting Times: 0~9900 Step: 100ms
20. Time: 0~20 minute (adjustable)
21. Type: Injector Tester
22. Feature: Non-dismantle Cleaning
23. Feature 2: Ultrasonic cleaning
24. Custom Bundle: Support almost all 12V car petrol injector
25. Bundle Description: Fit for Motorcycle HONDA YAMAHA SUZUKI SANYANG
26. Model name:: Autool CT200 injector cleaner